Car Diagnostic Tools Enter&quot

Tips on how to Connect an Engine Analyzer 1Locate the vehicle's plug-in. On most post-1995 cars there's a "D"-shaped socket attached towards the bottom with the dashboard Auto diagnostic tool, beneath the steering wheel.

2Insert the engine analyzer's connector in to the plug Car Diagnostic Tools, and turn the analyzer on.3Place the essential in the ignition and turn the ignition switch to the "on" position. Tend not to begin the engine.4Wait approximate three minutes for the analyzer to display the difficulty code. Look the code up inside the manual or on the software package that was supplied with all the code reader.

Tips on how to Clear Wrangler Codes 1Open the driver's side door and crouch down.2Look beneath the steering wheel and towards the left. You need to see an on-board diagnostics (OBD) port which you can use to plug in the diagnostic tool.3Plug the diagnostic tool in to the OBD port.4Turn the ignition to the "On" position.5Scroll through the options on the diagnostic tool until you reach "Clear Codes" then press the "Enter" button. You have successfully cleared the codes.